Publicidad
Borrar todos los datos en la tarjeta de memoria:
Si mantiene pulsado cualquiera de los botones de grabar, el LED comienza a
parpadear. Mantenga presionado este botón hasta que el LED se apague. Todos los
datos en la tarjeta de memoria se borrarán de forma permanente.
AVISO: Tenga cuidado al borrar todos los datos en la tarjeta de memoria. Los datos
se borrarán de forma permanente y no se pueden recuperar.
2. Brand selector
With 8 bits dip switch, the user can make difference combination for difference remote
brand. The brands selection show as table 1.
3. Learn Button and LED
In RX-multi receiver, there're 2 independent channels. Each channel has independent
learn button S1, S2 and L1, L2.
4. Power Input Selector
The RX-multi can be worked at the input AC/DC 12V~30V. However, it's better to
change the PIS according to the power input. If the input is great than 24V, shorten pin 2&3;
shorten 1&2 if input less than 24V.
5. Exchangeable Memory Card
The memory card can be removed from board for read, copy and backup.
6. How to entry remote and Erase all remote
Entry one button or remote:
1. First, selecting the correct brands for remote will be entry by dip switch;
2. Press the learn button, the LED turn on. Press the button on the remote, the LED
flashes 4 times, this button entry into the TX-Multi successfully.
3. Repeat step 2 for another button.
4. 2 channels works at same.
Erase all data in memory card:
Pressing and holding either learn button, the LED start flash. Keep holds pressing this
button until the LED turn off. All data in the memory card will be erased permanently.
Notice: Be carefully for erasing all data in the memory card. The data will be erased
permanently and cannot be recovered.
All manuals and user guides at all-guides.com
Publicidad
