Working Mode - Carrier XCT 7 40VCB117FQEE Manual De Instalación Y Funcionamiento

Software Installation

Working mode:

No limit: All the working mode is available
Cool only: Indoor can only operate in cooling mode. It allows no other mode.
Heat only : Indoor can only operate in heating mode. It allows no other mode. Last in first out : It executes
the last input order regardless of where it has come from.
40VCB117FQEE, wired controller or remote controller: for e.g., Initially 40VCB117FQEE sends low speed,
then wired controller sends high speed, finally the unit starts working at high speed.
Central control : Only available with 40VCB117FQEE. Wired controller or remote controller can only switch
'on' or switch 'off' the indoor unit.
Lock : All orders are sent by 40VCB117FQEE only. Wired controller or remote controller can only display
the working condition.
(c) Multi indoor unit's control: To control several indoor units, please follow the steps listed below :
• Hold the "Ctrl" button and click on the indoor unit you want to control
• Press the ON/OFF button to switch on/off the indoor unit,
• Drag the slider to set temperature
• Click on the fan speed you want to set;
• Click on the working mode you want to set;
"Hold the "Ctrl" button and
click on the indoor unit
you want to control"
"This area shows the available control functions,
not the detailed operation status of the current
indoor unit."
28