Duronic KS1055 Manual Del Usuario página 8

All manuals and user guides at all-guides.com
Weighing
1) Place the scale on an even and hard surface, for instance a table or
counter-top. Avoid soft surfaces as this will not enable the user to get accurate
results.
2) Switch the scale on by pressing the "ON" button and the LCD screen
will initialize.
3) The scale will turn on and the LCD display will show "0g". Change the
weight unit as needed, by pressing the unit touch button
4) Place the ingredients you want to weigh on the glass plate and the weight
will be displayed.
5) Remove the ingredients onc�� nished.
6) The scale will turn off automatically after 60 seconds. You can also switch
the scale off anytime by holding on to for 2 seconds.
7) If the scale goes off automatically, press the "ON" button to switch on
again.
Tare Function (Auto-Zero)
The zero/tare function is extremely useful to calculate the weight of ingredients
that cannot be put directly on to the platform. For exampl�� our or liquids,
which require a container before weighing.
In order to use this function, place the empty container or object on to the
scale, and then press the 'ON' button . The scale will switch on and
indicate 0 g
8