Lincoln 3614 Manual De Instrucciones página 3

OPERATION
To position the oil drain bowl, loosen lock ring, raise the drain
bowl to the desired position and retighten.
IMPORTANT!
When draining the oil from the vehicle, open Valve B to allow
the oil to flow into the tank and open Valve C to allow air to
vent as tank fills.
Level indicator shows the quantity of oil in the tank.
IMPORTANT!
Never fill the tank over the maximum level given by the level
indicator.
Form 402557
All manuals and user guides at all-guides.com
EMPTYING TANK
Close ball valve B.
Connect compressed air to air nipple, Open Ball Valve C.
allowing tank to pressurize up to max. pressure 7.25 PSI (0,5
bar).
When using Schrader Valve, close Ball Valve C. Check that all
three shut off valves are closed. Apply air pressure through
Schrader valve until air comes out of the vent valve.
Fasten drainpipe to the used oil drum.
Open Ball Valve A.
Once emptying is complete, disconnect compressed air and
close Ball Valve A.
Re-open Ball Valve B.
The Used Oil Receiver is fitted with a safety valve (F), calibrat-
ed to 14.5 psi [1 bar].
Model 3614
Used Oil Receiver
OR
Page Number - 3