Akai QXA6710 Manual De Instrucciones página 39

BASIC FUNCTIONS
Switching power on/off: Save energy
To avoid unnecessary energy consumption always adjust
the source selector to off position.
General operation
1 . To select your sound source adjust the source
selector to USB.CD/OFF/AM/FM.
2 . Adjust the sound with the VOLUME controls.
3. To switch off the set, adjust the source selector to
OFF position.
RADIO
Radio reception
1. Slide the FUNCTION selector to
setting - FM or AM.
2. Rotate the TUNING control to find the desired
stations.
NOTE: If you have tuned to an FM
stereo station, the FM stereo LED indicator
will light.
3. When you have finished listening, slide the
FUNCTION selector to the OFF position to shut
the power off.
USB PLAYBACK
1. Slide the function selector to
2. Press the CD/USB button to switch USB mode (indicated in the LC dis-play).
3. Insert a USB memory stick into the USB port.
4. Display will show total track number
5. Press PLAY/PAUSE to start music playing
6. Press or to select tracks
7. Repeat function can be selected identical to CD/MP3 playback
8. Press STOP/FOLDER to end playback
9. Press STOP/FOLDER to select desired Album
Note: Due to fast changing IT technology, this unit may not be compatible with some
USB storage device.
* USB support Specification: USB V1.1/V2.0
All manuals and user guides at all-guides.com
a desired
USB.CD position.
GB-31
RADIO
– For FM, pull out the wired antenna. Incline and
turn the antenna. Reduce its length if the signal is
too strong (very close to a transmitter).
– For AM the set is provided with a built-in antenna
so the telescopic antenna is not needed. Direct the
antenna by turning the whole set.