12Vdc Vandal Resistant Rugged Outdoor Wall Mounted Dome Camera Enclosure
RHW75C12N............. IP Network Ready 7" Vandal Resistant Outdoor dome housing with wall mount, clear dome polycarbonate, 12VDC input (ideal for solar
and battery powered applications), heater / blower, 42vA, for an IP Network PTZ camera
Página 1
12Vdc Vandal Resistant Rugged Outdoor Wall Mounted Dome Camera Enclosure RHW75C12N..... IP Network Ready 7” Vandal Resistant Outdoor dome housing with wall mount, clear dome polycarbonate, 12VDC input (ideal for solar and battery powered applications), heater / blower, 42vA, for an IP Network PTZ camera To be used with the 81-IN5481 Instruction Manual.
IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS Read these instructions. Keep these instructions. CAUTION Heed all warnings RISK OF ELECTRIC SHOCK DO NOT OPEN Follow all instructions. Do not use this apparatus near water. CAUTION: TO REDUCE THE RISK OF Clean only with damp cloth. ELECTRIC SHOCK, DO NOT REMOVE COVER ( OR BACK).
Página 3
Register Your Products Online www.moogS3.com/technical-support/product-registration Moog values your patronage. We are solely committed to providing you with the highest quality products and superior customer service. With 3-Year and 5-Year warranties (depending on the product purchased) we stand behind every product we sell.
™ During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Manufacturer at Moog Decatur Operations, 2525 Park Central Boulevard, Decatur, Georgia, 30035. The Product to be repaired is to be returned in either its original carton or a similar package affording an equal degree of protection with a RMA # (Return Materials Authorization number) displayed on the outer box or packing slip.
Electrical Specifications Contents of Box RHW75 Power 12VDC 12 VDC 49 Watts Accessories: Heater: 20 Watts, Blower: 2 Watt Camera Power: (See Camera Specifications): 27 Watts Max Tools Required: .100” Flat Head Screwdriver Phillips Head Screwdriver English 12 VDC 49 Vatios De Accesorios: Calentador: 20 Watts, Blower: 2 Vatio Energía De la Cámara fotográfica De : (Véase Las Especificaciones De la Cámara fotográfica): 27 Vatios...
Página 6
WALL MOUNTING 4”-5” Trim incoming control & power wires to 4”- 5”, Bracket is designed for 45° conduit tting (If using the for either wall or pendent bracket conduit). Run wire into bracket secure to wall. • El soporte se diseña para la guarnición del conducto 45° (si usa el •...
Página 7
WALL MOUNTING Important Gasket Must be in place 26 Watts COAX (coax wire not supplied) Wiring the dome can be completed by Align large arrows referring to the diagram. • Atar con alambre la bóveda puede ser terminada • Con seguridad soporte del montaje a emparedar. Tire del cableado refiriendo al diagrama.
Página 8
FOR PENDENT/ WALL MOUNTING 4”-5” Trim incoming control and power wires to 4-5 for Secure lanyard to lanyard clip either wall or pendent bracket • La tapa segura de la cubierta SM5 con mercancías duras • Con seguridad soporte del montaje a emparedar. Tire del cableado a través del soporte y del ojal de la posición según lo demostrado.
Página 9
Important Gasket Must be in place Align large arrows To lock turn clockwise • Alinee las flechas grandes • Alinee las flechas grandes • Alignez les grandes flèches • Alignez les grandes flèches • Richten Sie große Pfeile aus • Richten Sie große Pfeile aus •...
Página 10
POWER Power and Control Inputs (Outside of Housing) RJ45 Camera Power (+ 12 VDC) 24VAC Camera Power (- 12 VDC) POWER Orange Camera Max 40 Watts Accessory Power (+12 VDC) Yellow Camera Orange Heater/Blower Yellow Accessory Power (-12 VDC) Green 52 Watts Heater/Blower Green...
Página 11
PB24 Addendum Additional wires are provided to run power to PB24. Use with connector supplied. Run RJ45 connector through PB24, wall mount, and connect lead from housing. • Los alambres adicionales se proporcionan a la energía funcionada con a PB24. El uso con el conectador proveyó. Funcione con el conectador RJ45 con PB24, emparede el montaje, y conecte el plomo de la cubierta.
Página 12
Align the arrows on the outside of the dome Connect Lanyard to trim ring assembly. and lock. • Alinee las flechas en el exterior de la bóveda y • Conecte el acollador con el montaje del anillo del trábese.
Replacement Parts List RHW75 IRHW75 PART NUMBER DESCRIPTION RC7C CLEAR REPLACEMENT CAPSULE 1A RC7T TINTED REPLACEMENT CAPSULE RPRH752 LOWER TRIM RING RPRH7503 DOME CLAMPING RING RPNET02 NETWORK HGS POWER SUPPLY RPFD072 24V HEATER 5A RPFD072/12 12V HEATER (12VDC MODELS ONLY) RPFD080 BLOWER RP40PCMD01...