Safety Instructions; Warranty Card - ACME WS04 Manual De Instrucciones

Installation
1. Connect the USB receiver to an open USB port on your computer
2. Take out the battery insulation sheet behind the keyboard
3. Turn on the power switch.
Charge description
When the light intensity is 100,000 LUX, the battery can be fully charged in three hours.
In order to maintain enough battery charge, try to place the keyboard in the sun or anywhere where indoor light is sufficient when you are not using
it. The keyboard can absorb light even when turned off.
After three years of use, please replace the rechargeable battery ML2032 as shown below:
Troubleshooting
• Check USB receiver connection; try to inserting receiver to another USB port on your computer.
• Take out the battery and reinstall it.
• Replace the battery.

Safety instructions

• Do not disassemble the product or remove any parts
• Do not put the product into water or any liquid. Should this happen, take the product off computer and contact your vendor or after sales service
center for maintenance
• Do not put the product close to heat source, or expose it to high temperature.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such
modifications could void the user authority to operate the equipment.
Waste Electrical and Electronic Equipment (WEEE) Symbol
The use of the WEEE symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed
of correctly, you will help protect contact your local authority, your household waste disposal service provider or the shop where you
purchased the product.

Warranty card

Product
Product purchase date
Failures (date, description, position of the person who accepts the product, first name, last name and signature)
1. Warranty period
Warranty enters into force starting with the day when the buyer
acquires the product from the seller. Warranty period is indicated
on the package of the product.
2. Warranty conditions
The warranty is valid only by providing an original document of the
product acquisition and this warranty sheet, which includes name
of the product model, product purchase date, name and address
of the seller.
If it is noticed during the warranty period that the product has faults
and these faults where not caused by any of the reasons when
the warranty is not applied as indicated in the paragraphs below,
manufacturer undertakes to replace the product.
The warranty is not applied to regular testing, maintenance and
repair or replacement of the parts which are worn out naturally.
The warranty is not applied if damage or failures occurred due to
the following reasons:
• Inappropriate installation of the product, inappropriate usage
and/or operating the product without following the manual,
technical requirements and safety standards as provided by the
manufacturer, and additionally, inappropriate warehousing, fall-
ing from heights as well as hard strikes.
Product model
Seller name, address
• Corrosion, mud, water and sand.
• Repair works, modifications or cleaning, which were performed
by a service not authorised by the manufacturer.
• Usage of the spare parts, software or consumptive materials
which do not apply to the product.
• Accidents or events or any other reasons which do not depend on
the manufacturer, which includes lightning, water, fire, magnetic
field and inappropriate ventilation.
• If the product does not meet standards and specifications of a
particular country, in which it was not bought. Any attempt to
adjust the product in order to meet technical and safety require-
ments such as those in the other countries withdraws all the
rights to the warranty service.
If no failures are detected in the product, all the expenses in relation
to the service are covered by the buyer.
www.acme.eu/warranty
GB
5