TASER AXON body Guía De Referencia Rápida página 11

Step 8: Audio Notification
The AXON body camera emits beeping sounds called audio prompts to notify you of the
system status. These audio prompts usually occur after you perform an action with the
camera:
Operating Mode
Powering On or Off
Recording an Event
The Device is Ending an Event and
Returning to BUFFERING Mode
The Battery is at 20 Percent Capacity or
Lower
The Camera Memory is Full
For more information, see the tutorial videos and the AXON body Operating Manual, available
at www.TASER.com/support/AXON.
Audio Notification
One Beep
Two Beeps (Every Two Minutes)
One Long Beep
Four Quick Beeps (Every 20 Seconds)
Alternating Frequency of Two Tones
that Occurs When You Double-Press the
EVENT Button. The Camera Will Not Start
Recording.