Dvico TVIX T-441 Manual Del Usuario página 11

Using TVIX HD TUNER
⑦ If you press power button while scanning, the
following message appears. Press YES, and
TViX will shut down.
Do you want to stop scanning
and power off?
YES
※ Checking Digital signal Reception
① Press the INFO button on the remote control.
② The Signal strength meter will appear on the
left-bottom.
③ If signal strength meter indicates less than 60%,
adjust your antenna to increase the signal
strength.
Continue to adjust the antenna until you find the
best position with the strongest signal.
3. Channel scanning
Press CH +/- or ▲ ▼ button to change the TV
channels.
You can also enter the channel number by using
the numeric keypad on the remote and the
channel will change after a few seconds.

All manuals and user guides at all-guides.com
English
TViX M-6500A
NO