All manuals and user guides at all-guides.com
SCC:,SC? IG'.
BLUETOOTH® HANDSFREE CAR KIT
PARTS INCLUDED:
(1) motorMOUTH II unit
(1) USB charge cable
(1) 3.5 extension mount (40" cable)
(2) Phillips head screws
(1) Y-splitter switch
(1) Car charger (5v-500mA)
Lower the volume on your radio down to zero. This will avoid any unwanted burst of
volume while pairing the motorMOUTH II unit.
1. Note: Plug the motorMOUTH II into power source before turning on the unit. Plug
the motorMOUTH II into the auxiliary input of your vehicle. If necessary use the 3.5mm
extension mount to relocate your auxiliary input to a more accessible location.
2. Press the MFB button to activate pairing• mode, the unit will begin to flash red and blue
to confirm.
3. From your mobile phone, activate Bluetooth and search for device name "BTAXM",
connect using the pass code "0000".
• Auto pairing mode: The unit will enter auto pairing on the initial set up only. It will enter auto
pairing mode 7 seconds after powering on.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
©2011 SCOSCHE INDUSTRIES, INC.
SPECIFICATIONS:
Weight: .35 oz./1 0g
Bluetooth profiles: HFP
Charge time: Up to 2 hours
Standby: Up to 120 hours
Talk/Music: Up to 6 hours
Range: 33 ft./1 Om
Battery: 85mA
QUICK START
motorMOUTH"' 11
SI 300BTAXM 01/11
BTAXM