Electrical Connection; Safety Information - LF UTILITECH DF1511-A Manual Del Usuario

CAUTION
1.To prevent a possible fire, DO NOT block air intakes or exhaust in any manner. Do not
use on soft surfaces, like a bed, where openings may become blocked.
2.Turn the power off when servicing this appliance. First turn the main power switch to the
"OFF"position. Then remove the electrical plug from the wall outlet.
3.DO NOT use outdoors.
4.This heater is not intended for use in bathrooms, laundry areas and similar indoor
locations. NEVER locate heater where it may fall into a bathtub or other water container.
5.DO NOT operate any heater with a damaged cord or plug or after the heater malfunctions,
has been dropped or damaged in any manner. Discard heater, or return to authorized
service facility for examination and/or repair.
6.This heater draws 12.5 amps during operation. To prevent overloading a circuit, DO NOT
Plug heater into a circuit that already has other appliances working.

Electrical Connection

Voltage
120 VAC, 60 Hz
SAVE THESE INSTRUCTIONS
This heater is for use on 120 Volts. The power
cord has a polarized plug as show below. (one
blade is wider than the other). To reduce the
risk of electric shock, this plug is intended to fit
in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician
to install the proper outlet. DO NOT attempt
to modify this plug or defeat this safety feature in any way. Never use with an extension cord
or relocatable power tap (outlet/power strip).
SPECIFICATIONS
Amps
12.5 Amps
2
Watts (max.)
1500 Watts