Trust 18282 Guía De Instalación Rápida página 4

Sound Bar Speaker - USER'S MANUAL
Installation
A Bluetooth Pairing button
1
B Coaxial input
C 3.5mm audio inputs
D Main Power switch
E LED indicator
Blue:
Red:
Blue/Red blinking:
F Standby button
G Volume -
H Volume +
I Source selection (select the preferred audio input)
J Feet mounts
K Remote control
L 3.5mm audio cable (to connect a mp3 player)
M 3.5mm to cinch audio cable (to connect a TV)
N Coaxial cable (to connect a dvd/blu-ray)
O Speaker feet
P Wall mount plugs and screws
For desk mount:
2
A
- Attach the feet 'O' to the speaker.
For wall mount:
B
- Drill 2 holes in the wall at 400mm from each other.
- Use the supplied plugs and screws to mount the speaker on the wall.
- Connect the power cable to the wall socket.
3
- Power on the speaker by switching the power switch 'D' on the rear of the speaker.
- Press the standby 'F' button (the indicator LED will turn blue).
Connect using Bluetooth  step 4
Wired connection  step 13
- Select the Bluetooth source on the remote control.
4
- Press and hold the pairing button 'A' for 3 seconds.
- The LED indicator 'E' will start flashing Blue/ Red alternating (pairing mode).
- Follow the steps required for your device as described in the following pages.
If a passcode is requested during the configuration of the device Use '0000'.
Active
Standby
Bluetooth pairing mode
2