Choice Of The Installation Site - EPTA IARP GLEE X-SLIM NV Manual Del Usuario

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
7. STORAGE AND DISMANTLING
WARNING! Use protective gloves during unpacking and installation operations.
During unloading and movement operations, avoid tilting the machine and avoid sudden manoeuvres. The unit is shipped anchored
onto a wooden base and protected by corner posts, cardboard top and nylon wrapping. For each subsequent handling of the cabinet,
the use of the wooden platform is recommended.
Carefully remove the packaging, taking care not to damage the components and not to throw away those that will be needed for
assembly.
ATTENTION! After unpacking, check that the appliance has not suffered damage during
transportation.
8.

CHOICE OF THE INSTALLATION SITE

In selecting the place of installation, ensure that the following instructions are observed, this being vital for proper and troublefree
working of the cabinet:
• Do not install the cabinet in the vicinity of heating radiators or other heat sources.
• Do not install the cabint where it is exposed to direct sun light (e.g. through windows).
• Do not expose the refrigeration unit to air currents from fans, open doors, conditioning units.
• Keep the air intake and outlet area around the plinth area of the cabinet clear of cartons and other obstacles.
• It is necessary taht the condensing unit obtains a good circulation of air around it; also the area around the condensing
unit should not be obstructed by boxes or other objects; keep a distance from the wall of 10 cm. at least.
9. NOTES AND WARNINGS
The appliance described in this manual conforms with Machine Directive 2006/42/CE.
The content of this manual is technical and the property of EPTA s.p.a. It is forbidden to reproduce, distribute or modify entirely or
partially its content without written authorisation.
The owner company safeguards its rights pursuant to legislation in force.
Read the manual carefully and adhere to the contents before installing and using the appliance.
The company cannot be held in any way liable for any damage to people, animals or the product conserved in the event of:
• Improper use of the equipment or use by unsuitable or unauthorised staff.
• Incorrect installation or power supply not suitable for the appliance.
• Non-compliance with this manual.
• Non-compliance with the maintenance program.
• Unauthorized modifications to the appliance.
• Installation of non-original spare parts on equipment.
• Installation and use of the equipment for aims differing from those specified in this manual.
• Tampering with or damage to the power supply cable.
Responsibility for application of the safety provisions outlined below is the responsibility of the technical staff responsible for the
activities planned on the equipment, who must ensure the authorised staff:
• Are qualified to perform the task requested
• Know and strictly comply with the provisions contained in this document
• Know and apply the general safety standards applicable to the equipment.
Tampering with or unauthorised replacement of one or more parts of the equipment, use of accessories
that change its use and use of spare parts differing from those recommended can cause risks of accidents.
Any intervention on the equipment strictly requires disconnection of the power socket and however no
guard (grids, casings) should be removed by unqualified staff; strictly avoid operating the freezer with
these guards removed.
GLEE X-SLIM NV
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
1 6 / 5 6
PAGE
UM000543
N° DOC