PrimoPassi 87-349 Instrucciones Breves

Non-Contact Thermometer
6-in-1
87-349
Model
These brief instructions allow you to quickly begin using your Non-Contact
Thermometer for Body Temperature Measurements. Please refer to
the Instruction Manual for more detailed instructions covering all features
of the thermometer, including Object Temperature measurements.
• The infrared technology used in this thermometer is safe and is not
harmful in any way. However, we recommend avoiding looking into the
lens during use.
Please refer to your Detailed Guidebook for complete
instructions regarding the many features of your
Non-Contact Thermometer.
All manuals and user guides at all-guides.com
User Guide:
To measure body temperature using your Non-Contact Digital Infrared
Thermometer, follow these steps:
1. Press the POWER button to turn the thermometer on. All symbols
on the display will momentarily appear, Fig. 1.
2. Ensure that the thermometer is in Person mode; the Person
symbol will be on the display, Fig 2. To alternate between modes
press and release the Person/Object Mode button until you see
the desired measurement symbol on the display.
3. Press and hold the SCAN button. The Person symbol, Scan in
Progress symbol and "00" should be displayed, Fig. 3.
4. While holding the SCAN button, aim the infrared lens at the
patient's forehead, holding the thermometer approximately 1.5"
– 2.5" away, Fig. 4.
5. Release the SCAN button. DO NOT MOVE THE THERMOMETER;
THE MEASUREMENT IS NOT YET COMPLETE.
6. The thermometer will beep once, and the temperature reading will
be displayed, Fig. 5. If the temperature measurement is below
100.4° F, a happy face will be appear next to the reading. If the
reading is 100.4° F or above, a sad face will be displayed.
7. After about one minute after use, the thermometer will
automatically beep and shut off.
Please Note:
• Wait at least one minute between consecutive readings to ensure
accuracy.
• Attempting to take temperature readings from sites on the body
other than the forehead may produce inaccurate results.
• The patient should remain still while the reading is being taken.
Fig. 1
• If "Lo," "Hi," "Err," or another error message appears, see the
Troubleshooting section of the manual for instructions on how to
resolve the problem.
• Infrared forehead temperature readings are equivalent to oral
Fig. 2
temperature readings.
• Readings taken while asleep should not be compared directly to
readings taken while awake, as body temperature while asleep
is typically lower.
Fig. 3
• Do not take body temperature readings within 30 minutes of
being outdoors, exercising or bathing.
• Illness may be present even without an elevated temperature,
particularly in the elderly, in infants under 3 months of age, and
those with compromised immune systems. If illness is apparent
Fig. 4
without a fever, consult with a healthcare professional.
Fig. 5
#93-2068 07/13