Technical Data; Safety Informations - BGS technic 3287 Manual De Instrucciones

TECHNICAL DATA

Speed: max. 18000 rpm
Cutting disc: Ø 75 mm
Output shaft: Ø 10 mm
Air inlet: 1/4"
Working pressure: 6.2 bar (90 psi)
Sound pressure level (LpA): 87 dB (A)
Sound power level (LwA): 98 dB (A)
Vibration level (ahd): 1.68 m/s²
Recommended hose: 10 mm (3/8")
Length: 310 mm
Net weight: 1010 g
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

SAFETY INFORMATIONS

When using pneumatic tools, fundamental precautionary measures must always be ensured in order
to reduce the risk of personal injury and property damage.
• Keep children and unauthorised persons away from the work area.
• Do not let any children play with the tool or its packaging.
• Make sure that the work area is sufficiently illuminated.
• Keep the work area clean, organised, dry and free from other materials.
• Do allow untrained persons work with this tool set.
• Ensure that the trigger is located in the OFF position when being connected to the compressed
air system.
• Do not carry out any modifications on the tool.
• Use only accessories that are dimensioned for use with compressed air tools.
• Disconnect the tool from the compressed air supply before installing accessories, when carrying
out maintenance work or the device is not being used.
• Maintain the tool with care. Check hoses and compressed air connections at regular intervals.
• Do not use the tool if it is damaged. Have the tool repaired by specialist personnel.
• When installing regulators, filters and other accessories, observe the manufacturer
specifications of the compressed air system.
• Store the tool in a dry and safe location out of the reach of children.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Air Cutter
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 3287
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed