Publicidad
Enlaces rápidos
Publicidad
Manuales relacionados para wilson & bradley CINETTO ASCEND
Resumen de contenidos para wilson & bradley CINETTO ASCEND
- Página 1 CINETTO ASCEND (PS70) Assembly instructions...
- Página 2 Italiano English Français Tutte le misure espresse in questo opuscolo All dimensions in this leafl et are stated in Toutes les mesures indiquées dans cette bro- sono in millimetri. millimeters. chure sont en millimètres. ATTENZIONE WARNING AVERTISSEMENT Non utilizzare spray ed oli anti frizione o Do not use any anti-friction oil or grease or Ne pas utiliser de spray ni d’huile anti frot- sblocca fi...
-
Página 3: Data Sheets
Schede tecniche Data sheets Data sheets Fiches techniques Datenblatt Ficha técnica 196mm from rear to face of door, allow 2-4 mm from rear wall to rear of the front door/ panel Fixes to rear wall Fixes to rear wall... -
Página 4: Istruzioni Di Montaggio
Istruzioni di montaggio Assembly instructions Assembly instructions Instructions de montage Montageanleitungen Instrucciones de ensamblaje... - Página 5 Flip over and apply adhesive Note: panel can be screwed in from behind, by drilling through frame...
- Página 6 Glue panel down, with visible face up...
- Página 7 Screw roller guide to frame from behind...
- Página 8 And underneath...
- Página 10 Adjust unit to floor, and level to desired height, Locate fixings and screw off to wall...
- Página 11 W 1800* = mm 1792 ANTA VETRO kg 11 GLASS DOOR H = mm 587,5 GLASS DOOR ±100 g *Dimensione anta telaio finita *Finished frame door size Slide door/roller assembly into place, and hook on tension bands to desired weight. On the 1800mm kit for 11kg.
- Página 12 W 1800* = mm 1792 ANTA LEGNO kg 6,5 WOOD DOOR H = mm 587,5 WOOD DOOR ±100 g *Dimensione anta telaio finita *Finished frame door size On the 1800mm kit for 6.5kg, 1 band is required...
-
Página 13: Glass Door
W 2400* = mm 2392 ANTA VETRO kg 14,5 GLASS DOOR H = mm 587,5 GLASS DOOR ±100 g *Dimensione anta telaio finita *Finished frame door size On the 2400 kit for 14.5kg. 3 bands are required... - Página 14 W 2400* = mm 2392 ANTA LEGNO kg 9,5 WOOD DOOR H = mm 587,5 WOOD DOOR ±100 g *Dimensione anta telaio finita *Finished frame door size On the 2400 set for 9.5kg. 2 bands are required Note: Ensure Locking screw is in place before releasing...
- Página 15 Lock face panel to synchronization frame with screws ±3 mm Using 6mm Allen key, 6 mm adjust door to level...
- Página 16 Icone Icons Icons Icônes Ikone Iconos Regolazione verticale Pannello di legno Vertical adjustment Wood panel Wood panel Vertical adjustment Panneau de bois Ajustement vertical Holzplatte Vertikal Einstellung Regulación vertical Panel de madera Lastra di vetro Glass plate Glass plate Plaque de verre Glasscheibe Placa de vidrio Cinetto F.lli S.r.l.