BenQ Siemens HKW-700 Manual Del Usuario página 5

• Activate the Car Kit's registration
mode by pressing and holding
• Activate your phone's Bluetooth
interface and start searching for
Bluetooth activated devices with-
in the range of your phone.
• When the Car Kit is located, the
phone will request you to confirm
the connection by entering a PIN.
The PIN is shown on the Car Kit
display.
• After the PIN has been entered,
the telephone ID is shown on the
Car Kit display which subsequent-
ly switches to standby mode. With
phones from other manufacturers
it may be necessary to make a con-
firmation on the phone for the Car
Kit to be able to switch to standby
mode.
The Car Kit is now ready for use. The
Car Kit and the phone can communi-
cate with one another and recognise
each other in future.
Using several phones
The Car Kit can save the connection
details of up to 4 phones, each of
which can be selected for use.
When a fifth phone is connected, the
entry details of the phone that has
not been connected for the longest
period of time are automatically
deleted.
Car Kit Bluetooth
Switching on the Car Kit
f
.
• Switch on the Car Kit by starting
your car and/or by pressing and
holding
• The Car Kit displays all known
phones in a list. You have around
5 seconds to select your phone.
After this time has elapsed, the
phone that appears first in the
list is automatically selected and
connected.
Should the selected phone not be
available the Car Kit will discontinue
the search after around 3 minutes.
® Portable (en)
b
.
3