NORTH STATES MyPet Safety Paws 7182 Instrucciones

For helpful tips and instructions, please visit our website: www.northstatesind.com or contact our Customer Care department via
email: CustomerService@northstatesind.com l Phone (763) 486-1754 or Toll Free: (800) 848-8421
CAUTION: This product will not necessarily prevent all accidents and is only a deterrent. It is not a substitute for proper
adult supervision. Stop using when pet can defeat it. Regularly check for wear and correct positioning. DO NOT use
product if damaged or broken. FOR INDOOR HOME USE ONLY.
WARNING: Adult installation required. Do not use this product to guard against toxic and dangerous substances or objects.
These dangerous items should always be kept "high-up" or placed in an area completely inaccessible to the pet. Any damage
to the property during installation or removal of this product is the sole responsibility of the end user.
Installation
Step 1:
Determine install location,
front or side of cabinet /
drawer. Clean and dry inside
surface of drawer / cabinet.
Step 2: Attach adhesive to both the
catch and latch. On the catch,
attach the adhesive to the side
with the hollow rectangular cut
out. On the latch, attach
adhesive to the back flat side
of the top rectangular body.
Step 3: Remove the adhesive backing
and position the catch
approximately 1" from the
inside top edge of the drawer /
cabinet (Figure 1). Align the
latch to engage with the catch
(Figure 2). Once properly
positioned, secure both the
catch and latch into place with
the screws provided (Figures
3 & 4).
Operation
To use: Open drawer / cabinet
slightly and press the latch
down in order for it to clear the
catch and fully open (Figure 5).
When closing the drawer /
cabinet, the latch will engage
automatically (Figure 6).
To Disable: Press down on
latch until you hear it click
(Figure 7).
North States Industries, Inc. I 5455 Highway 169 N, Plymouth, MN 55442 I www.northstatesind.com
INSTRUCTIONS FOR NO-NO CABINET
LATCH 7182
Tools suggested: Phillips screwdriver and pencil (not provided).
Important: Please keep for further reference.
Parts included:
X10
X60
B
A
Front Installation
Install in the front of the
cupboards/ drawers
1 1
3
5
7
Distributed in the USA by
A. Screw
B. Catch
D
C. Latch
D. Catch Adhesive
C
E. Latch Adhesive
E
2
4
6
Made in China
Side Installation
Install at the side of the
drawers
1 2
3
4
6
5
7