Hummer H-120 ARGB Manual Del Usuario página 6

Intel mounting
Align the arrows on the bracket and the pump base, turn the bracket clockwise to secure it to the
pump base. *The Intel bracket is universal LGA2066/2011/1700/1200/115X.
Intel LGA2066/2011
1. Thread the LGA2066/2011 standoff
into the motherboard CPU cooler
mounting holes.
Intel LGA1700
1. Push the screws on the backplate to the outside and then put the backplate from the back of the
motherboard and insert the long screws through the motherboard.
2. Put the LGA1700 standoff onto the long screws of the backplate.
3. Clean the CPU surface and apply a thin layer of thermal grease onto the CPU.
4. Put the pump onto the CPU. Secure the block using the tightening nuts.
2. Clean the CPU surface and apply a
thin layer of thermal grease onto
the CPU.
3. Put the pump onto the CPU.
Secure the block using the
tightening nuts.