SECU4 BlueWatchDog Manual Del Usuario página 4

Activation of BlueWatchDog ™
Press the key for 1 seconde.
The icon illuminates.
To switch off the BlueWatchDog ™ , press on key for 3 secondes.
4 Activation of the protection
™
On the BlueWatchDog
Activate the BlueWatchDog ™
The icon illuminates.
On your mobile phone
®
Activate the Bluetooth function on your mobile phone.
Open the application « BlueWatchDog ™
in the « games & Applis » folder of your phone.
Note: If there is a problem, refer to the user manual of your phone or in the installation section on www.secu4.com/install.
Cliqck on the opening page. The application searches your BlueWatchDog
Note 1: The search time for BlueWatchDog ™ can be up to 1 minute.
Note 2: If the BlueWatchDog is not recognised, ensure that the BlueWatchDog
Note 3: If several BlueWatchDogs are located in the perimeter, please, isolate and make sure that no other BlueWatchDog
is present and lit.
™
The icon on the BlueWatchDog
Click on the icon
™
The icon BlueWatchDog blinks.
The protection is active, The picture
Insert the BlueWatchDog ™ in the object you want to protect and keep the phone near you.
6 English
Layout.indd 6-7 Layout.indd 6-7
». It is installed by default in the « applications » folder on
®
™
via Bluetooth .
™ is well lit.
blinks.
appears.
Notes:
• Do not put the phone in the protected object.
• Avoid inserting the BlueWatchDog in metal objects or very close objects that can disrupt the signal emission
®
Bluetooth (key, magnet, etc.).
The subject in which you insert the BlueWatchDog
The parameters of default protections are:
Protection zone: middle (about 5 to 15 metres)
Warning time: 5 seconds
Alarm sound level on the BlueWatchDog
Alarm on the phone: ringing and vibration
If your the protected item is moved 5 to 15 metres from you, your phone will ring and vibrate while displaying
an alert You will then have a few seconds to react and return to the protection zone. After this time, the
alarm will starts on BlueWatchDog
In case of outbreak of the alarm discharge and disable it by pressing the alarm icon
You can also make a receipt automatic alarm if you return within the perimeter of the BlueWatchDog
scheduled within 3 seconds when it is on alert.
To exit the application, select « Exit » at the bottom right on your phone screen.
The BlueWatchDog ™ expires automatically.
™
IMPORTANT !
1. Do not approach the BlueWatchDog
your Mobile phone for optimal functioning.
2. Do not use BlueWatchDog ™ when the battery is exhaus
ted. Its effectiveness is reduced and the frequency of false
alarms increases.
™
is now protected.
™ : 3 (~80dB)
™ and protect the subject in which it is inserted
3. Do not use BlueWatchDog ™ in airplanes or other places
™ at less than 20 cm of
that require your mobile to be off.
4. During surveillance of persons, set the power
of the alarm to a minimum or a silent alarm.
on the phone.
™
English 7
26.9.2008 9:23:31 26.9.2008 9:23:31