Care & Maintenance - Gioteck MX-1 Manual Del Usuario

troubleshooting
Having trouble with your MX-1 Micro Media Remote? These troubleshooting steps will show you the smoothest path to
resolving your issue. Be sure to perform troubleshooting before having your product serviced.
My Remote isn't working with my movie.
• Make sure the IR Receiver is not covered up and has clear line of sight with the Remote.
• You need to be within 15 feet of the IR Receiver.
• Try unplugging and re-plugging in the IR Receiver into USB port 1 on the PS3™ console.
• A particular movie studio uses a slight variation on their Blu-ray™ mapping, in this instance
we have programmed the MX-1 to behave the same as described in Operation on page 6,
but with a longer press on the following functions: Play/Pause, rewind & fast forward.
I am having trouble getting my wireless controller to work.
• Try pressing the PS button on your wireless controller and assign port 1.
Refer to the PS3™ manual.
• Your wireless controller may need to be charged. Please follow the instruction manual
supplied with your PS3™ for further info.
My Gamepad doesn't seem to work with the MX-1 plugged in.
• Press the PS Button on your controller and select reassign controller, and change the
assignment to 1.
email: support@gioteck.com
www.gioteck.com
08 | TROUBLESHOOTING
All manuals and user guides at all-guides.com
care & maintenance
If the battery is leaking and you come in contact with it, take the following actions:
Contact with eyes: Contact with skin/clothes:
Do not rub, Flush with clean water. Clean infected area with water.
Seek medical attention immediately. Contact your doctor immediately if swelling or soreness occurs.
storage environment
It is best to store the Remote in a dry Never open the Remote body. Opening the
and dust free area. Do not store near Remote body will void your warranty.
extreme temperatures. Keep out of reach of children so that
small parts cannot be swallowed.
REPLACING THE BATTERY Make sure to follow the directions
carefully to avoid injury.
Follow the instructions on page 5,
use a 3V CR2032 battery. Always make sure to cover any metal
contacts on the battery with a piece
of tape when disposing of the battery.
Never handle damaged or leaking
batteries. Do not allow battery to come in
contact with extreme heat or fire. Avoid
direct sunlight or heat sources such as a
heater.
RECYCLING BATTERIES.
Please help preserve our environment;
Watch type batteries are recyclable.
Make sure to return your battery to a
collection and recycling center near you.
CARE & MAINTENANCE | 09