Publicidad
OVERVIEW
1. MASTER CONTROL
Used to adjust the master volume.
When the dial is pressed you are able to cycle
through and select DSP modes in the DSP menu.
2. INPUT
Combination XLR / Jack input to receive
connection from a mixer or amp.
3. OUTPUT
Audio signals routed from each input are sent
through this output. This is a line level signal.
4. POWER SWITCH
Used to turn the speaker ON or OFF.
5. IEC SOCKET
For connecting to a mains power supply using
the supplied IEC power cable.
A fuse is included within the IEC socket for added
protection - if the fuse fails ensure it is replaced
with a fuse of the same type and rating.
SW-P15X
2
INPUT 1
INPUT 2
5
4
MASTER
1
PUSH FOR MENU
3
OUTPUT 1
OUTPUT 2
4
Publicidad
