Trevi DTV 2509M Manual De Instrucciones página 5

DTV 2509M
LCN:
Use the navigation keys to activate/deactivate the Logical Channel Number (LCN). This function allows

numbering the channels according to the reception sequence (ON) or leaving the progressive numbers
already assigned 1,2,3,... (OFF).
Auto Fuso orario (Auto Time Zone):
Use the navigation keys to activate/deactivate the automatic time zone assignment according to the

selected country.
Fuso orario (Time Zone):
 Use the navigation keys to select your time zone. You cannot modify this selection if the "Auto Fuso
orario" ("Auto Time Zone") item is set to ON.
AUTOMATIC SEARCH
The automatic search deletes the previously selected channels, if any, and searches for new ones ac-
cording to the country selected at the "Impostazione Paese" ("Country Settings") item.
 Press the OK navigation key to start the automatic search.
Press OK to delete the database and to start the search, or press EXIT to go back to the installation

screen.
MANUAL SEARCH
The manual search adds and does not delete previously selected channels, if any. The user needs to
know the frequency and the width of the channel band. If the same frequency band and bandwidth are
scanned more than once, the previous channel will be deleted.
 Press the GREEN navigation key to start the manual search.
 Use the navigation keys to select a channel: each channel has its own frequency band and bandwidth.
Press OK to start the search.

The user can also modify the number of the channel by pressing the RED key, and can then set it by
using the numeric keypad. The same can be done for the frequency band and the bandwidth, which can
be both modified by using the numeric keypad.
Note:
If the message "No signal" is displayed, it means that the TV is getting no signal. Check the cable
or the antenna system.
REORGANIZING DVB-T STORED CHANNELS
It allows changing the position of a previously stored channel.
Press MENU to access the main menu.

 Select TV.
 Select ELENCO TV (TV LIST).
 Use the navigation keys  to select the channel to move.
Use the navigation keys  to select SPOSTA (MOVE) (check that the LCN item in the INSTALLA-

TION menu is set to OFF).
Press OK.

 Use the navigation keys  to reach the newly selected position.
 Press OK to confirm.
 Press the YELLOW key to save your selection. Press OK to confirm.
Note:
You can apply the same procedure to the Radio channels. Select RADIO in the main menu
instead of TV, then select RADIO LIST instead of TV LIST.
All manuals and user guides at all-guides.com
ENGLISH
5