Maintenance; Adjustment Of The Quick-Fastener; Disposal; Environmental Note - EUFAB PREMIUM 2 Manual De Instrucciones

Maintenance / Disposal / Contact

Maintenance

Check the bicycle carrier for wear before the start of every
journey. Defective metal parts and straps in particular must
be replaced.
Please refer to our customer service for the replacement
of parts.
Any modification of original parts and materials or the
construction of bicycle carrier can adversely affect its
safety and serviceability.
The steel parts of the bicycle carrier are protected in the
works against corrosion by a powder-paint coating. If this
paint coating is damaged, please have the damage
rectified professionally as soon as possible.
Under normal conditions and use, the bicycle carrier only
requires cleaning, and is otherwise maintenance-free.

Adjustment of the quick-fastener

Carry out this maintenance operation only if the bicycle
carrier cannot be fitted firmly to the trailer coupling, as
described in the chapter "Fitting".
• Remove the bicycle carrier from the trailer coupling, as
described under "Dismantling".
• Remove the dust protection cap.
• Loosen the locking nut slightly, as shown in the
illustration.
• Screw in the setting screw one quarter of a turn.
• Tighten the locking nut.
• Check whether the carrier is now firmly seated on the
trailer coupling, as described under "Fitting". If not,
repeat the above steps.
36

Disposal

Environmental note

Due to its lighting system, the bicycle carrier is an
electrical device.
Do not dispose of electrical appliances in
household waste! Discarded electrical and
electronic equipment must be collected separately
and recycled in an environmentally sound manner.
Contact your municipal or city government on how
to dispose of old electronic equipment.
The materials are recyclable. You are making an
important contribution to protecting our
environment through recycling, material recycling
or other forms of re-utilising old appliances!
Dispose of the bicycle rack in accordance with the
laws and conditions in your country.

Contact

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal
Germany
Telefon:
+49 (0) 202 42 92 83 – 0
Telefax:
+49 (0) 202 42 92 83 160
E-mail:
info@eal-vertrieb.com