Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CLUSTER PROGRAMMING
Setting clusters / UHF input
- The amplifier has 3 UHF inputs which are splitted over 10 clusters.
There are three possible configurations :
Input
UHF1
UHF2
Number of
2
8
cluster(s)
2
7
2
5
To set the number of cluster(s) per input :
- Turn the button to select Split UHF mode.
- Push the button to confirm.
- Turn the button to set one configuration :
I-II
III
1
2
UHF1 cluster indicator
UHF2 cluster indicator
UHF3 cluster indicator
- Push the button to confirm.
Notes :
- UHF1 is set for 2 clusters, UHF2 and UHF3 are set for different number of cluster(s).
- Each cluster can be switched off (Park function).
For example if you only need one cluster for UHF1, set the second cluster on channel 00 to switch it off
(see following paragraph "Setting channels / cluster").
All manuals and user guides at all-guides.com
UHF3
UHF1 clusters are indicated by the YELLOW LEDs n° 1 and 2.
0
UHF2 clusters are indicated by the RED LEDs n° 3, 4, 5, 6, 7 and 8.
1
UHF3 clusters are indicated by the GREEN LEDs n° 6, 7 and 8.
3
Split UHF
Split UHF
3
4
5
6
7
8
9
10
UHF Clusters
Split UHF
9
The LED is green.
The LED is red.
Display of selected configuration :
Input
Display
Number of
"8.0"
cluster(s)
"7.1"
"5.3"
The LED is green.
UHF2
UHF3
8
0
7
1
5
3
Publicidad
Tabla de contenido
