Safety Instructions; Technical Data - LaserLiner 4K5 WP 400 Manual De Instrucciones

Safety instructions

Using artificial, optical emission (OStrV)
DIN EN 62471
Information on maintenance and care
Clean all components with a damp cloth and do not use
cleaning agents, scouring agents and solvents.
Remove the battery(ies) before storing for longer periods.
Store the device in a clean and dry place.

Technical Data

(Subject to technical changes without notice. 21W30)
Luminosity
high / medium / low / red
Duration
high / medium / low / red
LED-chip
Protection class
Power supply
Charging-port
Charging time
Operating conditions
Storage conditions
Dimensions (W x H x D)
Overall weight
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
www.4k5tools.com
12
EN
Risk Group 2
CAUTION: Possibility of harmful optical radiation.
Hazard for retina from blue light between
400 and 780 nm. Do not look into the lamp
for longer periods during operation.
Can be harmful to eyesight.
400 / 200 / 100 / 3 lm
2.5 / 5 / 8 / 15 hours
Cree XP-G3
IP 65
Li-Ion 3.7 V / 1 Ah /
3 x 1.5V LR03 (A A A) /
3 x 1.2V HR03 (A A A) NiMH
USB-C
approx. 2.5 hours
-20°C ... 65°C
-30°C ... 65°C
66 x 45 x 40 mm
111 g (including battery pack)