General Guidelines - HQ-Power HQSM10009 Manual Del Usuario

3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm)
in front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the
device.
•
Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
•
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
•
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
•
Mechanical wear and LEDs are not covered by warranty.
•
A qualified technician should install and service this device.
•
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
•
This device is designed for professional use on stage, in discos, theatres, etc. The device should only
be used indoors with an alternating current of 230 V~, 50/60 Hz.
•
Use the original packaging if the device is to be transported.
•
Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
1 power input and fuse holder
2 on-off switch
3
LCD display
4 remote controller input
5. Operation
5.1 Control Panel
button
FUNCTION
VOLUME
TIMER
MANUAL
UP
DOWN
V. 01 – 13/04/2017
function
programming mode
wind speed
starts the timer-controlled operation
allows momentary 100% wind speed
•
scroll through the menu options in ascending order
•
increase value
•
scroll through the menu options in ascending order
•
decrease value
HQSM10009
5 DMX input and output
6 handle
7
angle adjustment
5 ©Velleman nv