Power On/Off; Video Recording - Wiseup GL1900A Manual Del Usuario

All manuals and user guides at all-guides.com
>> Please make sure a Micro SD card (4GB-32GB) is securely fitted into the SD
card slot on your camera. The camera will not work without a Micro SD card. A
SDHC Class 10 Micro SD card is recommended. If no Micro SD card is fitted into the
camera, the red indicator light will stay illuminated while the blue one will flash 6
times and turn off together with the red one. The camera will shut down automatical-
ly.

3.1. POWER ON/OFF

3.1.1. Power on the camera by holding down the Power Button for 2 seconds. The
blue indicator light will flash once and then stay illuminated, indicating the camera
has entered into standby mode automatically.
3.1.2. Power off the camera by holding down the Power Button for 4 seconds. The
blue indicator light will flash 3 times; then both the blue and red indicator lights will
flash once and turn off.
[Note]:
The camera will shut down automatically if it is in standby mode without any operation more
than 1 minute.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by holding down the Power Button for 2 seconds. The
blue indicator light will flash once and then stay illuminated, indicating the camera
has entered into standby mode automatically.
3.2.2. Press the Video Recording Button for 2 seconds to record video and the blue
indicator light will keep flashing.
3.2.3. Press the Video Recording Button once to stop recording video. The blue indi-
cator light will flash quickly 3 times and then stay illuminated, indicating the camera
is back to standby mode.
[Notes]:
1). A video file will be generated and saved every 10 minutes automatically.
2). This glasses camera can record video continuously for 1.5 hours on a full charge.
3). Video Resolution: 1920×1080P Video Format: AVI
3.3. CAMERA /STILL PHOTOGRAPH
3.3.1. Power on the camera by holding down the Power Button for 2 seconds. The
blue indicator light will flash once and then stay illuminated, indicating the camera
has entered into standby mode automatically.
3.3.2. Press the Camera Button once to take a photo. The blue indicator light will