Charging The Internal Battery - Wagan Brite-Nite WR600 Manual De Usuario

Brite-Nite WR600 LED Spotlight
™
OPERATION
1. Locate power switch
2. Click 1X for high
Click 2X for medium
Click 3X for low
Click 4X to turn off

CHARGING THE INTERNAL BATTERY

Please charge before initial use. In order to prolong the life of the battery, be sure
to fully recharge the unit every 3 to 6 months, even if the unit has not been used.
1. Only use charging cable provided with the device.
2. Open the cover on the charging port located above the power switch.
3. Insert the included charging plug into the charging port.
4. Plug the other end of the cable into a USB power port such as a USB wall
charger, USB car charger or power bank.
5. The charge indicator LED will illuminate red while charging and will turn
green when fully charged (about 4 hours).
3
by Wagan Tech
™
www.wagan.com
®