Tabla de contenido
Publicidad
CONTROLS & FUNCTIONS
1. DIGITAL MEDIA PLAYER
Enables you to play music through the speaker
using a variety of platforms. For more information
please see page 9.
2. MIC GAIN
Increase and decrease the volume of the
microphone inputs (7). Note that this does not
control the volume of the wireless microphones.
3. LINE LEVEL
Increase and decrease the volume of the line
input.
4. ECHO
Increase or decrease the amount of echo to be
added to the inputs.
5. MP3 VOLUME
Increase or decrease the level of the digital
media player input.
6. VOLUME
Increase or decrease the overall volume of the
master output of the speaker.
7. MIC INPUTS
2 x TS ¼ jack inputs suitable for low impedence
microphone signals. Note, this input does not
support microphones that require phantom
power.
8. LINE INPUTS
Stereo RCA inputs suitable for high impedance
line level signals.
9. MIX OUTPUT
Stereo RCA output that provides a master output
of the speaker's mix at a line level signal.
10. GRAPHIC EQ
Control the frequencies of the master output at
100Hz, 330Hz, 1KHz, 3.5KHz and 10KHz. Boost
or cut the frequency by +/-12dB.
11. WIRELESS MICROPHONE VOLUME
Control the volume of the wireless
microphones. Power to the receiver can be
switched on and off using the on/off button.
12. BATTERY CHARGE INDICATOR
Four level indicator to show the battery life.
The red light indicator flashes when the charge
level is below 25%. At this point, you need to
recharge the battery as soon as possible to
continue use.
13 & 14. ANTENNAS
Receive radio frequency signals from the
wireless microphones. Be sure these are
extended when in use with the wireless
microphones.
15. BATTERY FUSE
This fuse is replaceable. When replacing please
ensure that you use an identical fuse as failiure
to do so could result in damage to the product.
Before replacing, make sure the unit is not
connected to any external power supply and
the mains plug is not attached.
16. MAINS CONNECTION
Use only the power cable supplied with the
product. This power socket is fitted with a F1A
at 250V fuse. Ensure to replace only with a like
for like fuse. Failure to do this could damage
the product. Before replacing, remove the unit
from any external power supply and ensure the
mains plug is not attached.
17. POWER SWITCH
Turns the speaker on or off.
7
Publicidad
Tabla de contenido
