Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Safety
High temperature protection
The temperature sensor mounted on the radiant electric the temperature
inside the cooker from time to time. When an excessive temperature is
detected, the cooking plate will be directly disconnected and stop power
output.
Residual heat indicators
After using the hob, waste heat remains in the heating area. The
indicator lamp will light up, warning to be away from the heating area.
Installation
Selection of installation equipment
Drill holes on the table surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50 mm space shall
be preserved around the hole.
Be sure the thickness of the table surface is at least 30mm. Please select
heat-resistant table material to avoid larger deformation caused by the heat
radiation from the hotplate.
As shown in Figure (1)
3
Publicidad
Tabla de contenido
