Blowing Function - Pur Line HAVC-02 Manual De Instrucciones

BLOWING FUNCTION

Please make sure there are no ashes in the hose before
blowing. Aspire clean air for a few seconds or shake carefully
the hose to clean it. Do not blow towards people.
· Close the top lock tabs.
· Push the levers down on both sides.
· Connect the flexible hose.
· When you turn on the switch, the device can be used to blow
sawdust, dust, leaves etc.
· Once you have finished using the blowing function, remove
the hose and pull the levers up.
AFTER USING THE VACUUM CLEANER
· Disconnect the vacuum cleaner from the mains.
· Disassemble the hose from the container.
· Let the contents inside the container cool down.
· Empty the container, clean with a humid towel and let dry. Do not use abrasive or aggressive cleaning agents.
· Brush dust on washable filter and, if necessary, wash it.
· Store the vacuum cleaner in a dry place.
WARRANTY
All the warranty terms finish 24 months after the buying date. It is absolutely necessary to show your buying invoice
to be covered by the warranty terms. The warranty covers any defect produced during the manufacturing or caused
by the raw material used in this product, and only in the event that the customer has followed the instructions and
maintenance showed in the user's manual, and only in the event that the installer has followed the installation
directions. This warranty does not cover any damage caused by accidents or negligence. The warranty only covers the
customer in case that any reparation has been done in our authorised repairing shops. The warranty DOES NOT COVER
any damage or injury caused to people, animals or things caused by an accident or the negligent use of this product.
The warranty will be suspended in case of any manipulation of unauthorised people or in case of non-original parts
or components.
DiscarDing worn householD Devices
The European directive 2002/96/EC pertaining to electrical and electronic waste prohibits such household
goods from being discarded with local refuse services. Worn devices must be collected separately to
optimize the recovery and recycling rates of the components therein to reduce detrimental effects on the
environment and on human health.
The "crossed out rubbish bin" symbol is affixed to all products as a reminder to respect the waste regulations.
All manuals and user guides at all-guides.com
6