Parts Diagram; How To Use - better chef IM-226B Guia De Inicio Rapido

7
1) Extra-wide self-adjusting toasting slots
2) Defrost button
3) Reheat button
4) Cancel button (Inside browning control)
5) Electronic variable browning control
6) Toasting/Eject lever
7) Slide-open crumb tray (underneath)
Note: Before first use, preheat the toaster for a few minutes without bread. If there is a little smoke, this is nor-
mal and may be the result of small amounts of cardboard dust settling on the heating elements.
A word of advice: Experience is the key
to using this appliance correctly. After a
few uses, you should be able to tell
which settings work best for your
recipes and cooking preferences
1) Plug the toaster in. Insert the bread, waffles, etc.
into slots (1) and press the Toasting lever (6) down to
begin toasting.
2) Select the type of toasting you require by adjusting
browning control. If reheating or defrosting, lower
1 - English
3

PArts DiAgrAm

how to usE

toasting lever and press corresponding button.
3) When toasting is complete, the unit will turn off
and the toasting lever should raise up automatically
thereby partially ejecting your bread, waffles, etc.. If
it does not raise automatically, then lift the toasting
lever until the bread, waffles, etc. eject.
Note: If the bread, waffles, etc. still do not raise, un-
plug the unit. Allow unit to cool completely and then
remove your food.
Note: Press the "Cancel'button (4) to stop toasting at
any time.
1
6
2
5
4