How It Works; Troubleshooting Guide - Guardian Technologies GG900 Instrucciones De Uso Y Cuidado

OPERATING INSTRUCTIONS
IMPORTANT: Lights will not turn on when lid is open.
1. Find a dry, flat location for the sanitizer.
2. Plug into a power outlet.
4. Close lid completely.
6. All 4 LED indicators will light at start.
Lights will be reduced in number until
E-4
cycle is complete (10) minutes.

How it works:

2 powerful UV-C bulbs provide front to back coverage
sanitizing without the use of chemicals or liquids. It's safe
for a variety of items including cell phones, keys,
earphones, make-up tools, eye glasses and more!
UV-C technology reduces the growth and development
of microbiological organisms such as fungi, bacteria or
viruses. UV-C light works by killing the DNA of germs,
reducing their ability to reproduce.
3. Place item(s) in sanitizing bin.
5. Press power button
7. When there are no more LED's lit,
your items are sanitized.
CLEANING
Clean the inside and outside of the unit by dusting it off with a dry microfiber cloth.
WARNING
ULTRAVIOLET-C LIGHT IS EMITTED FROM THE BULB WHEN THE UNIT IS ELECTRIFIED,
EYE INJURY OR IRRITATION COULD RESULT. NEVER ATTEMPT TO OPERATE THE UNIT
WITHOUT THE LID CLOSED.
WARNING
ALWAYS UNPLUG THE UNIT FROM AN ELECTRICAL OUTLET WHEN CLEANING. THERE
ARE NO SERVICEABLE PARTS ON THIS UNIT. UNDER NO CIRCUMSTANCES SHOULD
YOU CLEAN THE BULB, BULB HOLDER OR CYLINDER WITH WATER OR WET SOLUTIONS.
THIS COULD CAUSE ELECTRICAL SHOCK.

TROUBLESHOOTING GUIDE

PROBLEM SOLUTION
Unit Won't Run. Check to confirm lid is completely shut.
Unit will not run with lid open.
Check if the power socket is the issue. Try testing the socket
with a lamp or other household items to ensure it is working.
Check to be sure cord is plugged in correctly to the unit
and the power outlet.
Light flickers. Bulb is burnt out. Contact Customer Service team.
E-5