Preparation For Use - Insignia IS-TV040920 Manual De Instrucciones

PREPARATION FOR USE

CONNECTIONS
Cables used here are available on the market.
[ANTENNA CONNECTION]
UHF/VHF Rod Antenna
(Not supplied)
OR
VHF/UHF
RF Cable
OR
VHF
UHF
Flat twin- VHF/UHF
lead cable Combiner
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT AND FULLY INSERT.
Note:
•
For your safety and to avoid damages to the unit, unplug the antenna cable from the
ANT. IN jack before moving the unit.
[EXTERNAL CONNECTION]
VIDEO1 input (Rear)
ex.
(OUT)
S-Video Cable
(OUT)
Audio Cable
Video Cassette Recorder
Note:
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for
●
connecting monaural audio equipment.
VIDEO2 input (Front)
ex.
Video Camera Video Game
Note:
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for
●
connecting monaural audio equipment.
SELECTING AUDIO/VIDEO INPUT
When you use the AUDIO/VIDEO input jacks, select "VIDEO1" or "VIDEO2" mode by hit-
ting [INPUT SELECT] on the remote control. The input mode changes by hitting the button
as following:
TV channel
INPUT
SELECT
• To use the jacks on the rear of the TV, select "VIDEO1".
• To use the jacks on the front of the TV, select "VIDEO2".
All manuals and user guides at all-guides.com
[CATV/SATELLITE CONNECTION]
*
CATV Box
or Satellite Box
OUT IN
75-ohm
Coaxial Cable
ANT. IN
OR
RF Cable
*
Some cable TV systems use scrambled signals and
require a special converter to receive these channels.
Consult your local cable company.
(IN)
Rear of this TV
(IN)
L
AUDIO IN
R
S-VIDEO
Audio Cable
(OUT) (IN)
(OUT)
(IN)
Video Cable
VIDEO
Front of this TV
VIDEO1 (Rear) VIDEO2 (Front)
INSTALLING THE BATTERIES
1 2
[BATTERY PRECAUTIONS]
• Be sure to follow the correct polarity as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
From Cable
System
• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
or Satellite
Antenna
From Cable
OPERATIONS
System
REMOTE CONTROL AND FRONT PANEL FUNCTION
POWER button
To turn TV on/off
Channel number buttons
CH(ANNEL) K K / L L buttons
To select channels
MENU button
To view on-screen menu
ANT.IN
MENU VOLUME CHANNEL POWER
VIDEO L AUDIO R HEADPHONE
L AUDIO R
VIDEO L AUDIO R
Note:
If some digits appear in the corner of the screen when the unit is turned on for the first time, hit
●
[POWER] without unplugging the power cord.
SLEEP TIMER SETTING
1
1
SLEEP
2 2
SLEEP
repeatedly
The time increases by 10 minutes
up to 90.
Install two AA batteries (supplied)
3
matching the polarity indicated inside
battery compartment of the remote con-
trol.
GAME button
SLEEP button
POWER GAME SLEEP
DISPLAY
DISPLAY button
1 2 3
To display CH No./Audio Status
4 5 6
CHANNEL
RETURN
CHANNEL RETURN button
7 8 9
To return previous screen
0 +100
INPUT
SELECT
INPUT SELECT button
To select TV or external input
CH
VOL VOL
CH
MUTE
MUTE button
MENU
VOL(UME)
To adjust volume
MENU VOLUME CHANNEL POWER
HEADPHONE
POWER button
To turn TV on/off
CHANNEL ▲/▼ buttons
To select channels
X X
VOLUME
To adjust volume
MENU button
To view on-screen menu
HEADPHONE jack
AUDIO L/R input jacks
VIDEO input jack
Notes:
When you disconnect the unit from the AC
●
outlet or when you have a power failure, the
sleep time will be lost.
To cancel the sleep timer, hit [SLEEP]
●
SLEEP 0
repeatedly until "SLEEP 0" is displayed.
The Sleep Timer Setting display will disap-
●
pear automatically after 10 seconds of the
operation.
SLEEP 10
K K / L L buttons
Infrared Sensor Window
Y Y
/ buttons