Publicidad
Idiomas disponibles
Idiomas disponibles
4. To install the back, align the female brackets in the back with the male brackets in the
chair base, slide the back down on the base. See Figure B. Push down on the top of the
back to lock the back into position. You will hear a click from each side of the chair to
ensure the back is locked in properly.
5. Plug the Lumbar and Headrest, See the Figure C. If your model is Headrest Only, you
only need to plug the Headrest.
SINGNATURE DESIGN BY ASHLEY
®
All Rights Reserved.
AUGUST 2016
00106
Publicidad
