Safety Precautions - HQ TORCH-L-CAMP01 Manual De Uso

Charging Via DC Jack Input
1. Make sure the lantern is in off mode.
2. Slightly pull out the "rubber cap" and plug the DC jack from the car adapter into the socket.
3. Connect the car adapter to its power source to start charging the lantern (10-12 hours
charging is recommended).
4. After charging unplug the jack from the lantern and replace the "rubber cap", now the
lantern is ready to use.
Precautions
• Make sure you charge the lantern during 15 hours before first use.
• This product is not designed to be charged via a 24 V car socket.
• 1-2 minutes recharging is recommended by crank winding after each time using the lantern
light. For long-term storage, make sure to get this product recharged via AC or DC adapter
for 10-12 hours every 3 months.

Safety precautions:

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
problem should occur. Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or
damage caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their
respective holders and are hereby recognized as such.
Keep this manual for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic
products should not be mixed with general household waste. There is a separate
collections system for these products.
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is required.
Disconnect the product from mains and other equipment if a
3