AKOR MX725 Manual De Instrucciones página 15

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
All manuals and user guides at all-guides.com
Note!
When you have finished cleaning make sure the parts controlled by the bowl safety system
(motor unit at the point where the lip of the lid fits into place)and for models with blender jugs (jug
housing on the motor unit, blender jug and lid), are not obstructed by solid waste. If necessary use
a soft brush to clean eventual residuals with the appliance unplugged from the mains.
The blades cannot be sharpened. Replace them if they are not cutting properly or are worn.
Contact an authorized Service Centre to purchase accessories, parts liable to wear and for
maintenance work on your appliance.
STORAGE
Make sure your appliance and all its accessories are completely dry before putting them away.
Your food processor has a space-saving storage system where all accessories can be put away tidily
in the bowl..
Attention!
To avoid damages never use the appliance with accessories still inside.
A
: Mixing Bowl
I. Chopping Function
-put the protect cover onto the body tightly ,as shown in Diagram 1
-put the plastic bowl on power unit and turn the handle in clock-wise direction, as shown in Diagram2&3
- Put the blade support on the axis in the middle of the bowl, and press it to the bottom. Then fix the chopping blade
to the blade support, as shown in Diagram 4&5.
Warning: The blade in sharp. Please only hold the plastic part while using.
- Put the food (eg. Meet) into the bowl, as shown in Diagram 6. Big piece food needs to be cut into small pieces.
( 2 cm x 2 cm x 2 cm).
- Put the cover on the bowl, and turn it until hearing the chattering sound, as shown in Diagram7.
-Fix the plug to the electric socket, Turn the knob to the required level, as shown in Diagram 8. ( The speed is
increased by levels. PULSE is the highest level . Turn the knob to the PULSE for any intervallic operation. )
-When the chopping is finished, Turn the knob to the"0". After the blade stops, pure out the food.
II. Whisking Function
Mixing function has almost the same operating steps as chopping function. Only change the chopping blade to
shredding blade. It is used for mixing and whisking of food, eg, egg、soup.
*****
III. Slicing & Shredding Function
- Put the protect cover onto the body tightly;
- Fix the slicing/shredding knife to the knife support, as shown in Diagram 9. Slicing knife makes the food into
slices. Shredding knife make the food into shreds.
- Put the bowl on the power unit first, then turn the bowl in clock-wise direction, until hearing the chattering
sound. Then put the knife support on the axis in the middle of the bowl, as shown in Diagram 10.
- Put the cover on the bowl, and turn it until hearing the chattering sound. Then fix the plug to the electric socket,
turn the switch to choose the level. Put into the clean food in strip from the entrance of the cover, and push the

Publicidad

Tabla de contenido
loading

Tabla de contenido