Operation And Functions - iTeknic IK-BH003 Guia Del Usuario

· Turn on the Bluetooth function on your device and search for nearby
devices. At this time, the red and blue light of the earbuds will
alternately flash slowly. Find "iTeknic IK-BH003" in the searching
results. Click the name to connect. Once connected, the LED indicators
on both earbuds will flash blue for 2 seconds.
If the pairing failed, the blue light will flash slowly, and the earbuds will
automatically shut down after 10 minutes.
Put the earbuds back into the charging box and they will disconnect
automatically and start charging. If the mobile phone is disconnected or
out of Bluetooth range, a new pairing will be performed.
Single Earbud Mode
·Take out one of the earbuds from the charging case, and the LED
indicator will flash red and blue. Press the control button twice to bring
the earbud into pairing mode.
·Turn on the Bluetooth function on your device, search for nearby
devices. Find "iTeknic IK-BH003" in the searching results and click the
name to connect.
Note:
If you want to change from Couple Earbuds Mode to Single Earbud Mode,
you need to put both earbuds back into the charging box at the same time,
then the earbuds will automatically shut down, (If the earbuds failed to turn
off automatically, press and hold the control button for 6 seconds, then put
it back in the charging box) and take both earbuds out from the charging
case to pair.
All manuals and user guides at all-guides.com

Operation and Functions

Function
Press the Control Button on either of the
Answer /
earbuds once to Answer;Press the
Control Button on either of the earbuds
Hang Up Phone Call
twice to Hang Up Phone Call.
Hold pressing the control button on either of the
Reject Incoming Call
earbuds for 2 seconds and when you hear a beep,
please release the button to prevent shutdown.
Press the control button on the left earbud
Previous Track
three times
Press the control button on the right
Next Track
earbud three times
Press the control button on either of the
Play / Pause
earbuds twice
Press the control button on the left
Volume -
earbud once
Press the control button on the right
Volume +
earbud once
When paired successfully, press and hold
the control button on either of the earbuds for
Turn On /
2 seconds to activate Siri, or activate it with a
Off Voice Control
voice command. Click to exit the Voice Dial
state and return to the previous state.
Operation
07/08