Declaration Of Conformity; Environmental Protection - Worx WX843 Manual Del Usuario

Install the wire and screen
accessory
Slide the accessory over the nose
of the nail gun until it fits into place
over the tab on each side of the
machine.
NOTE: Drive a test staple in a scrap
piece of the same material you will
be using to test for a desired drive
force.
To use the screen and wire
application
Remove the jammed nail
WARNING: Always remove
the battery pack first.
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
There are no user serviceable parts in your power tool.
Never use water or chemical cleaners to clean your power
tool. Wipe clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation slots clean.
Keep all working controls free of dust. Occasionally you
may see sparks through the ventilation slots. This is
normal and will not damage your power tool.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities or
retailer for recycling advice.
20V Cordless Crown Stapler
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
See Fig. F
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description 20V Cordless Crown Stapler
Type
machinery, representative of nail gun)
Function
See Fig. G1, G2
Complies with the following Directives:
2006/42/EC
See Fig. H
2014/30/EU
2011/65/EU&(EU)2015/863
Standards conform to
EN 60745-1
EN 60745-2-16
EN 55014-1
EN 55014-2
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2020/11/02
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
WX843 WX843.X (843 - designation of
Fastening various materials
11
EN