tecnum MS 18 Manual De Instrucciones página 4

EN
This tool enables you to screw and unscrew without needing to be
anywhere near a mains source, and to drill into wood plastic and metal,
using the suitable drill bits.
To screw or unscrew, you simply insert a screwdriver bit that fits the shape of the
screw into the chuck.
The mechanical speeds, if your machine has them, function like a gear box:
Slow speed (to be used for the screwdriver function) = maximum torque (force).
High speed (to be used for drilling) = reduced torque.
The harder you press the trigger button, the faster the chuck rotates.
The torque adjustment, if your machine is fitted with this, means that you can set the
required torque, by disengaging the motor (stopping the screwdriver function).
This means that you can screw to a uniform depth, without damaging the material
you are screwing into. Very useful for screwing into plasterboard or laminates, for
example.
715240-Manuel-C.indd 4 26/01/07 12:00:34