Wan Settings; Dynamic Ip - SOYO AVRO3002 Manual Del Usuario

All manuals and user guides at all-guides.com
SOYO AVRO3002 Ethernet Router Manual

5.2. WAN Settings

The AVRO 3002 supports 3 types of WAN connection – Dynamic IP
(DHCP Client), PPPoE, and Static IP.

5.2.1. Dynamic IP

Under this mode, AVRO 3002 enables DHCP client to get IP address
automatically from your service provider. The Host Name is optional, but
may be required by some Service Provider's. The default MAC address is
set to the WAN's physical interface on the AVRO 3002. If required by
Service Provider, you use the <Clone MAC Address> button to copy the
MAC address of the Network Interface Card installed in your PC and
replace the WAN MAC address with this MAC address. If necessary, you
can use the <Restore> buttons to restore the WAN IP address.
12