Denver TRC-1470 Manual De Instrucciones

INDOOR & WIRELESS OUTDOOR THERMOMETER
WITH REAL TIME CLOCK & SNOOZE ALARM
MODEL: TRC-1470
1 . INTRODUCTION
Thank you for purchasing our In/Outdoor thermometer with wireless thermometer sensor and real time clock. The main unit
is designed to receive temperature signals from maximum 3 remote sensors in different locations, and it is also equipped with
a snooze alarm. To ensure proper operations, please read this instruction manual carefully and save it for future reference.
2 . DESCRIPTION OF BUTTONS
Main Unit
A . [SNOOZE/LIGHT] button
Activate the snooze function when an alarm sounds or turn on the backlight for 5 seconds.
B. [CLOCK] & [ALERT] button
Press the [CLOCK] side to display the real time clock, calendar or alarm time. When display the real time clock, press
and hold the [CLOCK] side for 2 seconds to activate the clock setting mode. When display the alarm time, press and
hold the [CLOCK] side for 2 seconds to enter the alarm setting mode.
Press the [ALERT] side to toggle to display high temperature alert and then low temperature alert for indoor thermom-
eter, channel 1, 2, 3 remote thermometers respectively and then return to normal thermo display mode.
Press & hold [ALERT] side for 2 seconds at the desired alert temperature display to enter its setting mode, use [+] / [-
] keys to change the settings, press [ALERT] again to confirm the setting or press no key for 10 seconds to auto-exit to
normal thermo display and confirm the setting.
C. [(°C/°F) MEM] button
Press the [(°C/°F)] side to select the temperature display in Celsius (°C) or Fahrenheit (°F).
Press the [MEM] side to toggle for max or min temperature memory reading for both IN & OUT thermometers. Press
All manuals and user guides at all-guides.com
INSTRUCTION MANUAL
~P.1~
ENG