Publicidad
Idiomas disponibles
Idiomas disponibles
E.3 Using the spiralizer
1. Cut both ends off the fruit or
vegetable so that they are
smooth; press this firmly and
centred onto the spiked disk [6].
Push the slide with spiked disk
against the holding ring [11a] of
the blade insert [11].
The fruit or vegetable must be
positioned straight and centred
on the spiked disk and the hold-
ing ring.
2. Push the slide towards the
blade insert and turn the crank
clockwise when applying slight
pressure.
Hint: The vegetable should have
a minimum diameter of approx.
2.5 cm so that it can be held
optimally by the spikes.
E.4 Dismantling the spiralizer
1. To release the spiralizer from
the surface, pull on the rubber
tag [3].
Remove the crank [8], unlock the
holder [7] and remove from the
slide [5].
Push the cleaned blade insert in
the mounting frame [4] and fold
this down. Click the remaining
blades in the storage compart-
ment [1].
2. Insert the crank [8] and holder
[7] in the intended fixing on the
rear side.
3. Push the storage compartment
[1] and slide [5] in to the guide
of the housing [2] and allow
to engage.
Cleaning and care
F
Clean the device after using
each time.
Do not scrape away stubborn
dirt using hard objects.
Storage
G
Keep the device dismantled and
assembled space-saving in a safe
place out of reach of children.
Disposal
H
If the device must be disposed of,
this must be carried out according
to the current, valid legislations
and provisions in the country
of use.
Do not dispose of the
device in domestic
waste.
Dispose of the packaging
sorted correctly!
GB
15
Publicidad
