Allen + Roth BV-6333-60 Guia De Inicio Rapido página 4

INSTALLATION INSTRUCTIONS
Step 2: Adjustable Level
2
2. In case of uneven floors, floor levelers are provided
at the bottom of the vanity. If necessary, adjust floor
leveler by hand to correct tilting and /or level doors.
Step 3: Backsplash Installation
3
3. To mount the backslash (C) to the wall, apply a thin
C
bead of silicone compound (not included) to the
unpolished back side and bottom of the backsplash
(C). Position backsplash (C) as shown onto vanity top
(B) and against the wall. Clean any excess silicone
compound before allowing it to dry.
B
4