Troubleshooting Guide - memorex NDC6005-SB Manual Del Usuario

Symptom Possible Cause
Display is not
on. Power is off.
Battery is weak or dead.
Pictures are
poor quality. Poor lighting.
Lens is dirty.
Subject too close.
Subject or camera moved as
picture was taken.
Image Quality set to Lo(w). Set Image Quality to Hi(gh).
Can't take
picture. Memory is full.
Power is off.
Can't upload
pictures. Poor connection.
Unit shuts off. Battery is weak or dead.
Video is grainy. Wrong frequency setting.
All manuals and user guides at all-guides.com

TROUBLESHOOTING GUIDE

Solution
Turn power on.
Replace battery.
Take picture in better lighting.
Clean lens with a soft cloth.
Move subject further away.
Hold camera steady until picture
is taken.
Delete some pictures.
Turn power on.
Securely connect to the computer as
described in this manual.
Replace battery.
Select the correct frequency.
25