Assembly - Ducati CORSE E-MOTO Manual Del Usuario

What's inside the box?
handlebar set
main bike
Assembly instructions
WARNING!
Remove safeguards on the product carefully and dispose of them acorrding to local
regulations.

5. Assembly

To be assembled by an adult.
1. Remove the stem cover from the
2. Install the handlebar kit and front
10
battery
tool
pack
stem. then carefully remove the
front cap of the stem with tools. (4.0
hexagon wrench) Pay attention that
the screws might slip out once the
screws are loosened.
cover. Tighten all four screws by
hand and ensure good contact
between the front cover and the
handlebars.
charger
owner's
manual