GGP ITALY BL 48 Li Manual De Instrucciones página 11

Ocultar thumbs Ver también para BL 48 Li:
Tabla de contenido

Publicidad

• The operator or user is responsible
for accidents or hazards occurring
to other people or their properly.
PREPARATION
• While operating the appliance, always
wearsubstantial footwear and long trousers.
• Do not wear loose clothing or jewellery
that can be drawn into the air inlet. Keep
long hair away fromthe air inlets.
• Wear protective goggles while operating.
• Wearing a face mask recommended
to preventdust irritation
OPERATION
• Operate the appliance only in
daylight or in good artificial light.
• Do not overreach and keep
your balance at all times.
• Always be sure of your footing on steps.
• Walk, never run.
• Keep all cooling air inlets clear of debris.
• Never blow debris in the
direction of bystanders
• Please use the full blower nozzle extension so
the air steam can work close to the ground.
MAINTENANCE AND STORAGE
• Keep all nuts, bolts and screws tight to be sure
the appliance is in safe working condition.
• Replace worn or damaged parts.
• Use only genuine replacement
parts anccessories.
• Store the appliance only in a dry place.
Use only the manufacturer's
replacementparts. Failure to do so may
cause poor performance, possible
injury and may void your warranty.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
ser types: This machine is intended for use
U
by consumers, i.e. non-professional operators.
The machine is intended for "DIY" use only"
WORK AREA SAFETY
• Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which
may ignite the dust or fumes.
• Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
All manuals and user guides at all-guides.com
ELECTRICAL SAFETY
• Avoid body contact with earthed or
• Do not expose power tools to rain or wet
PERSONAL SAFETY
• Stay alert, watch what you are doing and
• Use personal protective equipment.
• Prevent unintentional starting Ensure
• Remove any adjusting key or wrench before
• Do not overreach. Keep proper
• Dress properly. Do not wear loose
• If devices are provided for the connection
ENVIRONMENTAL PROTECTION
• Environmental protection should be a
• Scrupulously comply with local regulations for
2
groundedsurfaces, such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electricshock if
your body is earthed or grounded
conditions. Water entering a power tool
will increase the risk of electric shock.
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
Always wear eye protection. Protective
equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on
the switch or energising power tools that
have the switch on invites accidents.
turning the power tool on. A wrench or a
key left attached to a rotating part of the
power tool may result in personal injury.
footing and balance at all times. This
enables better control of the power
tool in unexpected situations.
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
of dust extraction and collection facilities,
ensure these are connected and
properly used. Use of dust collection
can reduce dust-related hazards.
priority of considerable importance when
using the machine, for the benefit of both
social coexistence and the environment
in which we live. Try not to cause any
disturbance to the surrounding area.
the disposal of packaging, deteriorated parts
or any elements with a strong environmental

Publicidad

Tabla de contenido
loading

Tabla de contenido