Remove Taillights – Open the liftgate. Remove 2 screws holding the light, firmly
but gently pull the light rearward and unplug the wiring connector.
Remove fascia - Remove screw from under wheel well trim just removed.
©2020 Horizon Global™ Corp - Printed in Mexico
Remove wheel well trim – Using trim removal tools, gently pry and pull upper
wheel well trim away from the vehicle. Taking care to not scratch the vehicle.
Remove fascia - Remove 4 screws from the bottom of the rear fascia.
Sheet 4 of 24
76364NP
12-8-20
Rev. A