Publicidad
Idiomas disponibles
Idiomas disponibles
HR-LU/GT
S26 / S26P
Set the HR-LU bar as per the drawing below. Block it with the two indicated M8
screws. Use point A and B.
~ Colocar la barra HR-LU tal como se muestra en el dibujo y blocar los puntos A y B
mediante los dos tornillos de M8 suministrados en el kit.
Set the hook onto the truss.
~ Colocar el garfio en el truss.
Join the cabinet + HR-LU bar with the hook adapter (A).
a) Firstly, put the front safety screw DIN965 M4x25 (B).
b) Use the bar holes to tilt the cabinet as per your desired inclination.
c) Put the locking pin M8 (C).
d) Use the optional SC-15 safety cable around the ACR-M8 eyebolt and fix it in a
secondary external point (D)
3
Dec 2021
Amate Audio
Publicidad
